Clean the inside of a windscreen
Remove light interior haze using clean cloths and a cleaning method approved for your vehicle’s glass.

What will you learn?
Remove light interior haze using clean cloths and a cleaning method approved for your vehicle’s glass.
Tools
- Two clean lint-free microfiber cloths; protective towelSearch Amazon UAE ↗
Materials
- Small amount of water or interior-glass cleaner approved for the vehicle and any coatingSearch Amazon UAE ↗
Step by step

Photorealistic illustration · Waey
1. Check the glass and prepare a parked workspace
Park in a safe place out of direct sun so the glass is cool and the vehicle will remain stationary. Check the handbook and any aftermarket film instructions before choosing a cleaner. Place a towel over vulnerable nearby trim without covering controls you need for access. Use clean cloths reserved for glass; a cloth carrying dashboard polish or grit can spread a greasy film or scratch the surface instead of clearing it.

Photorealistic illustration · Waey
2. Lightly dampen the cloth rather than the dashboard
Apply a small amount of the approved cleaner or permitted water to one cloth, away from switches and screens. The cloth should be lightly damp, not dripping. Wipe a small reachable section of interior glass with controlled overlapping strokes, keeping liquid off the instrument panel. Do not stretch awkwardly across the cabin or press on mirror mounts. Working in sections helps you see the edge of each cleaned area before residue dries.

Photorealistic illustration · Waey
3. Finish each section with a clean dry cloth
Use the second clean cloth to remove remaining moisture and light residue while the section is still easy to identify. Turn to a fresh part of the cloth as it becomes damp or dirty rather than redistributing the same film. Keep pressure gentle, particularly near any film edge or fitted sensor housing. If a mark will not lift with the approved method, stop instead of scraping or trying a stronger household chemical.

Photorealistic illustration · Waey
4. Check the sightline before returning to the road
From the normal driving position, inspect the whole reachable glass area in daylight for missed streaks and distracting smears. Correct a small missed patch with clean cloth surfaces, then remove the towel, bottles and loose cloths from the cabin controls and footwells. This check assesses cleaning only; it does not repair chips, damaged tint or internal glass defects. Do not drive until the view and the vehicle’s normal controls are unobstructed.
Final checks
If the view remains distorted or haze appears within the glass, seek appropriate glass or vehicle advice rather than repeatedly applying cleaners.
Sources
Photographs are credited beside each image. Generated photorealistic illustrations by Waey; linked videos remain with their creators.
