Electrical
Basics · Outlets · Safety
Make and check a ferrule-ended bench jumper
Prepare a matched stranded-copper jumper, inspect the crimps, check continuity and practise fitting it to an unpowered push-in terminal.
Start learning →
Measure a removed AA alkaline cell with a Fluke101
Measure a removed AA alkaline cell in DC volts and understand why an unloaded reading does not prove remaining battery life.
Start learning →
Terminate and wiremap a Leviton Cat 6 data-outlet practice link
Build an isolated two-jack T568B bench link with supported 110 termination, capped QUICKPORT outlets and a checked eight-wire map.
Start learning →
Join isolated wires with a WAGO221-2411: qualified-user bench exercise
For electrically qualified users: prepare and join two isolated solid copper practice wires, inspect the inline connection and verify continuity without power.
Start learning →
Route a USB cable with indoor Command clear round clips
Route one disconnected USB cable on a suitable smooth indoor surface with matched clear clips, accessible release tabs and the full adhesive waiting period.
Start learning →
Test a loose blade fuse with a Fluke 101
Check an already loose automotive blade fuse with the Fluke 101, verify the meter before and after, and record a clear result.
Start learning →
Prepare wires, build and troubleshoot a switched LED circuit
Learn wire cutting and stripping, breadboard layout, resistor reasoning, switch continuity and DC-voltage diagnosis while building a complete battery-only practice circuit.
Start learning →
Inspect and test a passive extension lead with a PrimeTest 250+
Formally inspect and electrically test a known passive single-outlet extension lead using a PrimeTest 250+.
Start learning →
Use a non-contact voltage detector and interpret its limits
Learn a complete preliminary checking sequence: select the detector, check operation before and after use, recognise AC-field indications and avoid dangerous conclusions from silence.
Start learning →