Assembly

Edge-band a plywood panel with iron-on wood veneer

Edge-band a plywood panel with iron-on wood veneer

Author: Waey TeamPublished:

Cover one straight bare plywood edge with preglued wood veneer, then cool, trim, smooth and check the bond.

Cover one straight bare plywood edge with preglued wood veneer, then cool, trim, smooth and check the bond.
Start learning →
Make a small mitred wooden picture frame

Make a small mitred wooden picture frame

Author: Waey TeamPublished:

Build a small tabletop picture frame from ready-rebated softwood moulding. Match hand-cut mitres, glue and clamp the corners, fit acrylic and a practice print, then add a matched tabletop support.

Build a small tabletop picture frame from ready-rebated softwood moulding. Match hand-cut mitres, glue and clamp the corners, fit acrylic and a practice print, then add a matched tabletop support.
Start learning →
Install cabinet pulls with a drilling jig and correct screw fit

Install cabinet pulls with a drilling jig and correct screw fit

Author: Waey TeamAdded:

Fit a two-screw pull to a sound removable timber front: prove the jig on scrap, drill supported holes, choose compatible screws and check the refitted front.

Intermediate · allow 1–2 hours for the first front and trial setup
Start learning →